Making a water tank

On thing on the to do list was making a water tank. Last days I already made some panels for the tank and yesterday we glued them in place with some putty. Today I put some fillets and tape in the corners. It was a bit difficult because I made the water tank under the waste tank and had to lay half up side down to tape the corners.

To do list

We are going to make a to do list for this winter season.
I already did some things.

• Moving the thermostat from the fridge.
• Making a protection for the VHF.
• Routing the instrument cable.
• Repairing the breaking strips and bolts of the rudder bracket.
• Give the rudder some more room on the sides to make a bigger angle.

Canting rig option setup

I put some pictures up from my canting rig option
I used some Colligo blocks for the cascade
For the top I used the CSS71-0
For the cascade I used some stacker blocks SSB-6 and SSB-9
On the chainplate I did use the CSS91-0
On the chainplate I also used a low friction ring to guide the line aft.
On the beam I used a constrictor 8 to hold the line and a Karver block on the deck near the beam.

at 15 seconds you can see the setup

Sorry for the crappy sound camera is not 100% ok