Sunday, June 5, 2016

put a filler on the inside of the beam mounts

Friday I sanded the sides and the nose in the morning and had to go to a reunion so I had no time to post something, on the way I picked up some primer to put over the filler. Saturday we went for some sailing in light air and only some wind on the end with a max speed of 10 kn. Sunday we had wind from the begin with a max speed of 12 kn. So we were quick at home and I did some filler on the inside of the beam mounts and the sides of the outside bunks. I bought a new second hand teleflex unit for my Spinlock throttle. I is a top mount unit but it can easily converted to take of the side plates.













Wednesday, June 1, 2016

sanded the deck and the upper side

I took two hours free and sanded the deck from the anker well to the entrance and the upper side from the trampoline tube to the deck. I sanded off a half kilo of dust in the vacuum cleaner, I thought I took a picture of all the the dust in the cleaner but it was not on my camera. It was a lot. The deck is now ready for some primer, I only have to sand the edge by hand to give it a little rounding.

Tuesday, May 31, 2016

Mirka Deros

I bought myself today a Mirka Deros 650CV sander and I sanded three hour with it with no problem, I had to stop because it was half past seven and I had to eat.  It was almost fun to work with it. It is a very light machine (1kg). The special sanding paper abranet works really good.

Sunday, May 29, 2016

Second layer of filler

In the morning I started with sanding and than did some filling on the deck. I did this with micro light and a little micro balloons to give it a different color. After F1 on television I went on with filling the rest of the deck. When that was done I did the nose, beam mounts, the top sides and the top of the after bunks.

Saturday, May 28, 2016

put some filler on the after side and the deck

Yesterday I put some filler on the after side and a second layer on the deck but I had no time to post it. Today I did a lot of sanding of the sides and the deck. I did this with some professional sanders from my neighbor, he has painting business and did give me some advise. The professional sanders make a lot of difference. The deck looks already good, I think it needs one layer of filler on some spots. I forgot to take some pictures.

Sunday, May 22, 2016

Little bit of racing and a little bit of building

Saturday we did race with six boats from the CTC and we had very nice weather, 12 knots wind and sunshine. After two small races of 55 minutes we did have a BBQ, fortuned two boats had to go home before eating but we had some drinks together. We should race today but it was raining and almost no wind and the forecast was not good to. So we called it of and went home. We sailed the first part but half way home the wind dropped completely so we motored the last part and we went home to do some work on Thriller. We taped the outside edge of the escape hatch and I finally did some work out again with sanding.


Friday, May 20, 2016

Started again with the water ballast tank

This week I did some sanding of the deck but I made no pictures of it because there is not so much to see. Wednesday I did pick up the beams to bring them home again. They stayed in the storage by my friend Marco's workshop. Today I started with sanding the front deck and when I had enough of it I decided to do the water ballast tank. I first cut out the spaces for the bailers and the I mounted the tubes for the line to operate the bailers. Nico did made them for me so I only had to glue them in. After the lunch I sanded the front so I could give it if a paint layer. After the tea break I did give the water ballast tank a clear coat so that the inside is smooth. As last job I painted the front with a second layer DD paint.