Friday, July 22, 2016

Sanded the bottom

I sanded the whole day the bottom and the sides. It is now ready to put the blue filler on top of it. This last filler is to fill the smaller dents and to protect the micro light filler. The blue filler is water resistant and the micro light not, it makes also a smoother surfaces.

Friday, July 15, 2016

Put the first filler on the bottom

Today I put the first filler on the bottom, I think some many others will come later to make it smooth. In the afternoon I put some filler on the bottom of the nose because I didn't have just enough in the morning but first I put some carbon on the end pieces of the hammerhead. This was still some foam and putty. The top of the end pieces have to be done later when the boat is turned over again. On the end I put some blue filler on the underside of the tramp lassing tubes, have not taken pictures of it.



Sunday, July 10, 2016

second layer of paint on the ceiling

In the morning I sanded light the paint I put yesterday on and than I put some grey primer in the cockpit lockers. In the afternoon after watching the F1 grand prix I put a second layer of DD paint on the ceiling and rolled it over with a structure roller. I put some carboxyl in the paint to make it a bit thicker and give structuur.



Saturday, July 9, 2016

Back from short holiday

Last week we had a short holiday so we did nothing on Thriller. Today I started with sanding in the morning and in the afternoon I painted the hole sealing inside and some panels. The inside have to be done again because the grey is still a little shining throug.





Wednesday, June 29, 2016

primer on ceiling in the front

I only had the morning to do some work, I first sanded the filler in the front before putting some primer on the ceiling. I than sanded the rest of the ceiling and after it was all finished I decided to put some filler in the middle were the two halves were put together.

Tuesday, June 28, 2016

put a primer on the ceiling

I spend the whole morning with sanding the ceiling so that we could put a primer on it. In the afternoon I started to put some filler first on the front sealing where we put some tape for the escape hadge. By the time I had finished that Fetske did arrive so she could do the primer on the rest of the ceiling. After the tea break we dremeld the after edge to fill it with some putty filler. After that I did sanding the outside for the rest of the time.


Monday, June 27, 2016

put a filler on the ceiling

In the morning we started with clearing the mess of yesterday so that we have a clean floor and working space. Before lunch Fetske prepare some carbon pieces for laminating the top escape hatch and the after edge. After lunch I started already with putting partially a filler on the front ceiling. When Fetske arrived we laminated some tapes together. After the tea break I started with filling the rest of the ceiling.