Sunday, October 30, 2016
Thrill Seeker to the winter storage again
Saturday, October 29, 2016
put a final layer of glass over the outside of the cradle
In the morning we did some prep work as sanding and routing some edges of the wood to laminated the outside with the last layer of glass. The vertical panels will be tape to this glass work after they are glassed to. I put some putty in the sharp corners before we put the glass over it. The vacuum is very help full to get everything nice flat and in the corners.
Friday, October 28, 2016
some more stuff for the cradle
Thursday, October 27, 2016
Gluing the center support of cradle on it
I took today free to work on the cradle again, it all takes longer than expected and it is a lot of work.
We used the old battens of the mold frames so this clears the pile of wood we still have. Fetske cleared the battens of packing tape while I cut the support frames. These had to be shorter because the side battens of the cradle where now in place. the next job was to fill the gaps between the supports what I made of two layers triplex. I filled the space in between also with two layers of triplex. After that all was in place I could start with gluing the battens on it. But before we could do that we first sanded the the rest of the packing tape of it what was still left on some places.

We used the old battens of the mold frames so this clears the pile of wood we still have. Fetske cleared the battens of packing tape while I cut the support frames. These had to be shorter because the side battens of the cradle where now in place. the next job was to fill the gaps between the supports what I made of two layers triplex. I filled the space in between also with two layers of triplex. After that all was in place I could start with gluing the battens on it. But before we could do that we first sanded the the rest of the packing tape of it what was still left on some places.
Tuesday, October 25, 2016
placing triplex strips on the cradle
Sunday, October 23, 2016
Unpacking the cradle
I had some computer troubles on my work yesterday evening and today so I could not do much, but when I arrived at home I did see that Fetske was still on some working clothes and told me she had unpacked the cradle. This are things I like it ;-). The peel ply is still on it because the laminate has to harden more. We did use 50% slow harder en 50% standard harder because we were afraid that we were not quick enough to do it only with standard harder. We found out that after all it maybe was possible .
Saturday, October 22, 2016
Laminating the cradle
Yesterday was a bussy day, in the morning I prepared the dagger board. In the afternoon we laminated the dagger board for the last time, this time on both sides. We the went to buy some extra harder for todays job. When that was done we went to our rigger to talk about our carbon mast and to seal the deal.
Today I started with sanding the dagger board and in the afternoon we laminated the cradle for our trailer

Today I started with sanding the dagger board and in the afternoon we laminated the cradle for our trailer
Subscribe to:
Posts (Atom)