out of the frames

First we had to unscrew a lot off screws before we could lift the float out of the frames, we had to use some force because It was stick on the battens with some putty. The battens have packing tape on it so if you get some space it pops out. After hoisting it to the sealing we dismantled the frames and cleaned the space.
We put back frames 6 and 12 and lowered the float. I Had to shorten extra foam off the float because it would not fit. We cleaned the edges from the putty. The front of the bow was not exactly on place so I glued it again holding in place with belts. This time nice alinend.

When you walk in the door
you see this