Installed a Echomax radarreflector

 Today I installed my recently bought Echomax radarreflector, it is one with the lassing option so you can tighten it to dimond wires. I also connected all the coax cables with some new connectors to the ais antenna splitter and closed the cable ducts.
The people from Echomax were so kind to sent it to me directly because the importeur in the Netherlands was not going to deliver the lassing option in the short time

An other thing I did was put some filler on on the instrument console and hope this was the last time so I can put some paint on it after some sanding tomorrow.

Some updates for 2023

I made a console for the instruments and wil put some more pictures next time of the console

I started last year with the anker piece but had no time then to finish it and now it is almost finisht.

This year we put a Axiom 9" plotter in place on a Ram arm and I do some rerouting of some cables, take some picture next time

I put up some pictures from some results and the cable routing, I placed the VHF splitter in the front because I can then directly couple the antenna cable from the mast on the splitter.