This weekend I finish the instrument panel, put the VHF in its place and closed the cable ducts.
I started with the outboard motor mount after I removed the outboard Friday to get it a service.
The outboard motor mount get one car with ball bearings so that it slides easier, one gas cable has to replaced to. For the new car the strip round the rail had to be cut a bit away because the car is wider.
We mounted the gennaker pole what had a rebuild and some little changes.
Today I installed my recently bought Echomax radarreflector, it is one with the lassing option so you can tighten it to dimond wires. I also connected all the coax cables with some new connectors to the ais antenna splitter and closed the cable ducts.
The people from Echomax were so kind to sent it to me directly because the importeur in the Netherlands was not going to deliver the lassing option in the short time
An other thing I did was put some filler on on the instrument console and hope this was the last time so I can put some paint on it after some sanding tomorrow.
I made a console for the instruments and wil put some more pictures next time of the console
I started last year with the anker piece but had no time then to finish it and now it is almost finisht.
This year we put a Axiom 9" plotter in place on a Ram arm and I do some rerouting of some cables, take some picture next time
I put up some pictures from some results and the cable routing, I placed the VHF splitter in the front because I can then directly couple the antenna cable from the mast on the splitter.
Put a small N2K meter in the cabin.
Mounted small kickers on the mast on both sides
The finished shelf
We cleaned the boat
Yesterday I put some EVA foam in the anchor well and dit some painting, today we did some painting too and did trial fit the anchor. I put some new carpet in the rudder bracket
Last week I did not post an update but we did do some small jobs. Yesterday I put some filler in the anchor well and mounted an halyard lead and today we did some painting and I started with the anchor bow roll but I have not taken pictures from it.
