clear coated the bottom under the bottom panels

I only did some in the morning because we are going to sail in the afternoon. I clear coated the bottom under the bottom panels and storage spaces under the bed.

lots of sanding

I  almost sanded the whole day on the inside, Fetske did buy some more sanding paper grid 40, this works it best after first tried some gris 120 and 80. Fetske did also come to help me with the sanding. On the end of the day Fetske did some painting and I did put some fairing putty on some low spots and another panel in the toilet room.

filling the toilet room

I had only the morning to do some things, so I did some filling in the toilet room. I filled a part of the daggerboard case and the back panel. This was the only part I did because you get the risk you thoughts your own filled work if you do a panel on the other side. I am also almost done with this batch of 5 kg filler so I have to buy new. The clear coat looks fantastic, I only had a pair little bad spots, bit too much epoxy, but they will be done when I do the final layers on the end when I have painted the toilet room. The rest of the time I did some sanding in the front.

clear coat

I first started to give the toilet and wash bowl a clear coat with a fast harder and I the filled some panels. In the afternoon I did the same again.

washbowl preparation

The washbowl had two spots were the laminated had a air pocket and on the place where the dryroll will come the laminate did not stuck on the edge. I repaired this with an injection needle and to put some epoxy under the laminated. After this was dry the result looked very good, tomorrow I will give the wash and toilet bowl a clear coat of special epoxy. After the work on the washbowl I started to work on the panel in the front to make it fit again, when that was solved I put some filler on the last spots in the front. With the the rest of the filler I did the kitchen top and front panel. On the end I started with sanding the panels what I did before.

Kermit green

Today we were free because of the King's birthday, so we did some final tapping's in the inside. We started with the front hatch where the water bag will come, this had to get some tape on the edges. We then gave the washbowl a nice carbon laminated with some Kermit green peel ply. This roll of peel ply was cheaper than the one I normally had. The next tape was the edge of the kitchen top. The two storage spaces under the bunks had to get a tape to and a place in a corner where I did forget a little piece before. We finally filled the edges of the panel for the front. Fetske went home after the tea break and I did a little sanding to see how the surface  was after some sanding and it looks already nice.

more filling

Because I had to work yesterday evening I could take some hours free in the afternoon today to do some filling again.